Installing Power Over Cable (Poc); Connecting The Usb Extension; On The Transmitter; On The Receiver - Marmitek Mega View 76 Guide Utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
6.
Connect the power cable [3] to the transmitter's "5V DC" connector and plug the
adapter into a wall socket.
Please note! Do not place the transmitter or receiver in an enclosed space such as a
TV cabinet or equivalent. Provide adequate ventilation to ensure that the product is
functioning properly and to protect against overheating.

4.4 Installing Power over Cable (POC)

The MegaView 76™ supports bi-directional Power over Cable technology, making it
easy to provide the transmitter and receiver with supply voltage from a single point.
This eliminates the need for a power connection for the receiver near the TV. The
supply voltage is transmitted from the transmitter to the receiver through the CAT5e/6
cable. This built-in technology allows you to place the receiver out of sight behind your
TV, without the need for a power outlet.

4.5 Connecting the USB extension

The MegaView 76™ features a built-in USB extension function. This enables you to
continue to operate connected HDMI sources, such as a media center PC or laptop,
from another room, using a mouse and/or keyboard.

4.5.1 On the transmitter

Connect your PC or laptop to the transmitter [3], using the supplied USB cable.

4.5.2 On the receiver

Connect your mouse and/or keyboard to the receiver [10].

5 Usage

5.1 Transmitter and receiver

1.
Switch ON the second TV or projector and select the correct HDMI input to which
the receiver is connected. This is usually done by pressing the "EXT" or
"SOURCE" button on your remote control.
2.
Switch ON the HDMI source.
3.
When the connection is established and the HDMI source is properly connected, a
video signal will appear on the (second) TV.
4.
If no video signal appears, check the lights according to the overview in section
5.2.
Please note: To be able to watch TV locally (via the transmitter's HDMI output), the
transmitter should always be switched on.
mon i to r
PC
6
HDM I
USB
t r ansm i tte r
UTP
re cei v er
HDM I
USB
TV
© MARMITEK

Publicité

Table des Matières
loading

Table des Matières