GymnaUniphy VACO 200 Manuel D'utilisation page 193

Recommended separation distances between portable and mobile RF
communications equipment and the 200-series device
The 200-series device is intended for use in the electromagnetic environment
in which radiated RF disturbances are contolled. The customer or the user of a
200-series device can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications
equipment (transmitters) and the 200-series devices as recommended below,
according to the maximum output power of the communications equipment.
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
Vaco 200
0,11
0,35
1,11
3,50
193
0,11
0,35
1,11
3,50
0,22
0,70
2,21
7,00