Publicité
Les langues disponibles
Les langues disponibles
Operating Conditions
Before starting engine, remove any excessive dirt and debris from cooling vents, exhaust,
and starter recoil areas. Then, check for loose or damaged parts, oil or fuel leaks,
and/or any other condition that may affect proper operation. Repair or replace all damaged
or defective parts immediately. Always keep all safety guards in place and in proper
working order. For safety reasons, the manufacturer recommends all maintenance and
repairs be performed by an authorized service center. Never move or tip the generator
while operating. Use generator only for its intended purpose. If you have questions about
the proper use of your generator, please contact customer support at 1-877-362-4271
or cservice@fnagroup.com.
Untrained persons, young children, and pets can be seriously injured or killed if allowed
to incorrectly operate or play with a running generator. Be sure anyone operating the
generator receives proper instructions, understands safe operation, and has read the
owner's manual before operating this product. Do not let children operate the generator
without parental supervision. Keep young children and pets away from the generator
while it is running. Always turn the generator off before leaving the area.
Failure to inspect this product before use could result in a hazardous situation resulting
in product damage serious injury and/or death. To avoid these hazards, inspect the
generator before each use. Check for loose or damaged parts, signs of oil or fuel leaks,
missing guards, plugged cooling vents, or any other condition that may affect proper
operation. Repair or replace all damaged or defective parts and keep all safety guards in
place and in proper working order before using the generator.
A running engine produces heat. The surfaces of the engine, related components, and
engine exhaust gas get hot enough to cause mild moderate burns or ignite materials
on contact. To avoid burns, do not touch engine surfaces or exhaust gases while
operating and allow engine to cool completely before moving, touching, or performing
any maintenance. To avoid a fire, keep all flammable materials at least five feet away
from all sides of the product.
This product has many parts that move at high speeds. Moving parts can cause crushing
injuries, broken bones, severe lacerations, and/or traumatic amputations. To prevent
injury, never place fingers, hands, feet, or other body parts near running engine. Never
operate product with covers, shrouds, or other guards removed. Do not wear loose-fitting
clothing, dangling drawstrings, or any other hanging items that could become entangled
in moving parts while operating. Tie up long hair and remove jewelry before operating.
Page 19
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
CAUTION:
WARNING:
WARNING:
UNTRAINED OPERATION
INSPECT BEFORE
OPERATING
HOT SURFACES
MOVING PARTS
Publicité
