Simpson SCGH5500 Guide D'utilisation Et D'entretien page 11

Installing the Handle
SCGH10000E
1. Hold the handle to the left of the generator frame as shown below, then slide
the handle toward the right onto the frame taking care to align the holes.
2. Place one flat washer on each bolt. Slide the bolts trough the handle bracket and the
generator frame. Place one flat washer on the exposed threads of each bolt. Thread
on one nylon-insert locknut onto each bolt; tighten.
1. M8 x 60mm bolt
2. M8 flat washer
3. M8 nylon-insert locknut
Page 9
(optional)
1 2 3