Simpson SCGH5500 Guide D'utilisation Et D'entretien page 10

Installing the Wheel set
SCGH10000E
The generator is very heavy. Use proper rigging when lifting the generator. Never stand
under the generator while moving it.
DO NOT place your hand between the generator feet and the wheel set frame. Your
hand may be crushed.
1. Carefully lower the generator onto the wheel set frame while aligning the mounting
holes.
2. Inset the bolt through the generator foot and the wheel set frame. Thread on a 3/8"
locking nut; tighten.
3
1 2
Page 8
(optional)
WARNING: WARNING:
CRUSH HAZARD
1. Generator foot
2. Wheel set frame
3. 3/8 x 1" bolt
4. 3/8" nylon-insert locknut
4