Qlima D 820 A Smart Manuel D'utilisation page 51

This notification message indicates that the dehumidifier has entered the automatic
P1
defrost function. Then let the appliance defrost until the message disappears.
This notification means that the water reservoir of the
dehumidifier is full. Remove the water tank from the device and empty it. As soon as
P2
the reservoir is put back into the device, the compressor will start working again after 5
minutes and the message will disappear.
This notification appears when the dehumidifier has been working for 360 hours,
causing the maintenance message to appear on the screen. It is recommended to clean
P3 the pre-filter. After it has been cleaned, the "SPEED" button can be pressed and the
message will disappear. This message will appear on the display after every 360 hours of
operation.
This notification will appear on the display when the device has worked for 2160
hours. It is recommended to clean the HEPA filter or replace it if necessary. After it has
P4 been cleaned or replaced, press the "SPEED" button which will clear the message. This
notification will continue to repeat after every 2160 hours that the device has been
working.
4
51