AENO EK8S Guide De Démarrage Rapide page 5

ENG Electric smart kettle AENO is designed for heating and boiling water at
home and in the office.
Model: AEK0007S/AEK0008S (Plug Type E/F), AEK0007S-UK/AEK0008S-UK
(Plug Type G).
Technical Specifications
Supply voltage: 220–240 V AC; Frequency: 50–60 Hz. Power: 1850.0–2200.0 W.
Dimensions (L×W×H): 212×162.3×262 mm. Capacity: 1.7 L. Water heating modes
with manual control: +40 °C, +55 °С, +80 °C, +90 °C, +100 °С, the range of
temperature adjustment when controlling through the application AENO:
40–100 °C. Function of maintaining the set temperature: up to 24 h. Emission
power: +20 dBm/100 mW.
Scope of Supply (fig. A)
Smart kettle AENO, stand (10), quick start guide.
Limitations and Warnings
The kettle is intended for domestic use only. Before using for the first time,
make sure that the network parameters are in accordance with the
specifications in the technical data sheet. Do not use a damaged device or
device with a damaged power cord and/or plug. Do not allow the power cord
to come in contact with sharp edges or hot surfaces. Do not immerse the
power cord, power plug, kettle or stand in water or other liquids. Do not use
the device outdoors. Place the kettle on a flat, stable surface. To prevent
damage to the plastic components, install the device away from external
sources of heat and do not place the device near or on top of other electrical
appliances. Do not turn on an empty kettle to avoid damage. Use purified
If you have any issues or difficulties using your AENO device, please
contact support by email at support@aeno.com or via the online chat at
aeno.com/service-and-warranty. Our specialists will help you solve the
problem, and you will not have to spend time and effort visiting the shop.
aeno.com/documents 5