Bosch Vision 300 Serie Notice D'utilisation, D'installation Et De Maintenance page 18

Accessories
The following optional accessories for
your dryer may be obtained from
customer service (see page 32) or from
your local dealer. Please follow the
installation instructions supplied by the
appropriate manufacturer.
Side exhaust kit
o
part no. WTZ 1265
Note:
See notes on maximum number of
elbows on page 17.
Bottom exhaust kit
part no. WTZ 1270
Note:
See notes on maximum number of
elbows on page 17.
D The bottom exhaust kit cannot be
used with a pedestal installed on
the dryer or if the dryer is stacked
with the washer.
LP - Gas Kit
part no. WTZ 1 280
The parts required for the LP version
can be obtained from your local dealer.
Please follow the installation
instructions supplied by the appropriate
manufacturer!
Note:
Dryer must be checked for proper
operation whenever the gas
connections have been broken.
Dryer rack
J
\
part no. WTZ1620
Use the dryer rack to dry washable
woolen textiles (e.g. sweaters) and
shoes.
Mobile home kit
part no. WTZ 1 275
Note:
Please check with the authority having
jurisdiction in your area to verify if a gas
dryer can be installed in your mobile
home. Once that has been verified,
installation of the dryer shall conform to
the Manufactured Home Construction
and Safety Standard, Title 24 CFR, Part
3280 {formerly the Federal Standard for
Mobile Home Construction and Safety,
Title 24, HUD (Part 280)}, and/or
Standard CAN/CSA-Z240 MH.
The kit includes a means to secure the
dryer to the structure.
See page 16 "Exhaust Air Connection"
for the exhaust duct installation
instructions.
The exhaust duct must be securely
fastened to a noncombustible portion
of the mobile home structure and must
not terminate beneath the mobile
home.
An opening to the outside must be
provided during installation. Insure that
the free area of the opening for the
introduction of outside air is not less
than twice the area of the dryer exhaust
outlet or use at least a 5 inch diameter
exhaust or at least a 25 in2 square
exhaust duct for the opening.
Pedestal Mounting Kit
A storage pedestal with a pull-out
drawer is available as an accessory for
your dryer. The pedestal adds
approximately 15 inches to the height
of the dryer. See page 11 for
dimensions.
Appliance must not be mounted
on a pedestal in stacked
installations.
part no. WTZ 1610 is for a solid white
color pedestal.
Other color pedestals may be
available.
Reference part no. WTZ 1610"X" in
which the X designates an available
color (eg: A for Anthracite, S for silver).
Please inquire at your dealer for color
choices available.
You may also consult a current product
catalog or visit our website at:
www.boschappliances.com
If mounting the dryer on a pedestal,
follow the instructions supplied with the
pedestal.
18