Xenios Compact Holder Mode D'emploi page 17

6. PACKAgINg AND STOrAgE
1 Store and transport the compact holder in clean and dry condition
2 The manufacturer shall not be held liable for damage caused by incor-
rect or improper storage only use the original packaging for transpor-
tation
3 All environmental regulations regarding the waste disposal have to be
followed An exposure of the compact holder to high mechanical stress
has to be avoided
7. SET uP THE FuSE PLATE
7.1. ATTACHINg THE FuSE PLATE
Before the compact holder is used, the fuse plate must be attached to the
console [fig 2 ] This fuse plate limits the opening angle of the control
panel, thus preventing the console from potentially tipping over
1 To prevent electric shock, disconnect power supplies
2 Clean the device using either a mild detergent solution or a common
disinfectant (e g Isopropanol)
3 Remove the red protective film from the fuse plate
4 Attach the fuse plate to the power supply above the indicator lights
5 Ensure that the fuse plate is firmly fastened to the console
pA C k A G I N G A N D S T o R A G E
EN
17