SOUNDMASTER DAB900 Mode D'emploi page 10

Initial settings after first switch on, you can select below options:
Each option can select by turn and confirmed by pressing "NAVIGATION / OK / VOLUME".
Select the desired operating language
⚫
Have 12- or 24-hours' time indication
⚫
The radio station announcement style and screen saver slide show
⚫
After the setting completed DAB scan will be done and search all available stations
During the scan the display show the number of found stations.
⚫
After the scan has finished, the unit will play the first alphanumerically found station.
⚫
POWER ON / OFF
Press to turn the unit on.
Press and hold
SELECTING MODES
During playing mode, press the
ADJUSTING VOLUME
Turn "NAVIGATION / OK / VOLUME" for adjust the volume.
Switch on and choose the DAB mode.
to open the DAB station list, rotate "NAVIGATION / OK / VOLUME" to choose,
Press
press it to confirm the required station.
Note:
➢ If there is no DAB+ reception at any time, change the position of the unit or adjust the
antenna. Press and hold
➢ If DAB reception is poor, dropouts may occur or the sound will be muted.
Change the position to improve the reception.
DAB STATION INFORMATIONS
Press repeatedly to cycle through the following information (if available).
Program type (PTY)  Ensemble name & Frequency 
Bitrate codec  Dynamic label segment (DLS)
Press "NAVIGATION / OK / VOLUME" for zoom DAB slide show.
BASIC OPERATIONS
to turn off the unit in standby mode.
repeatedly to select the modes.
to start full scan again.
DAB
2
DAB900 / English Instruction Manual