Setting Up And Connecting To The Power Supply; Items Supplied And Transport Inspection; Unpacking - UNITED OFFICE ULGD 350 A1 Mode D'emploi

Never perform hot lamination on fl ammable, heat-
■
sensitive and/or meltable materials and do not laminate
drawings on temperature-sensitive paper or material that
will undergo changes in colour or quality when subjected
to heat.
Never laminate valuable or unique documents. Although
■
the appliance complies with all current safety norms/
standards, malfunctions can never be completely ruled
out. Malfunctions with the laminator can result in damage
to the document being laminated.

Setting up and connecting to the power supply

Items supplied and transport inspection

The appliance is delivered with the following components as standard:
▯ Laminator ULGD 350 A1
▯ Document support
▯ 10 x Laminating pouches DIN A4 for hot laminating (80 micron)
▯ 10 x Laminating pouches DIN A5 for hot laminating (80 micron)
▯ 10 x Laminating pouches for hot lamination of business cards (80 micron)
▯ This operating manual
NOTICE
► Check the contents to make sure everything is present and for signs of visible
damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the Service Hotline (see chapter Service).

Unpacking

♦ Extract the appliance, the laminating pouches and the operating instructions
from the carton.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing by children. There is
a risk of suff ocation!
ULGD 350 A1
GB
47