Publicité
Les langues disponibles
Les langues disponibles
Sanding confined areas
1.
Detach the front grip from the tool.
2.
Hold the handle with one hand.
3.
Turn the tool on and wait until it attains full speed.
Gently place the tool on the workpiece surface.
4.
Keep the entire pad level and even with the sur-
5.
face and apply slight pressure on the tool.
6.
Move the tool along curves, wall faces and in other
confined spaces, sanding with the front and corner
edges of the pad as you need.
► Fig.27
MAINTENANCE
Always be sure that the tool is
CAUTION:
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol
NOTICE:
or the like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
After use
Wipe off the tool using a dry cloth or cloth slightly moist-
ened with soapy water at regular intervals.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
•
Abrasive paper (with pre-punched holes)
•
Hook-and-loop type of abrasive paper
•
Punch plate
•
Backing pad (For use with hook-and-loop type of
abrasive paper)
•
Backing pad (For use with conventional type of
abrasive paper)
•
Dust bag
•
Dust box
•
Filter
•
Hose
•
Battery protector
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
13 ENGLISH
Publicité
