Whirlpool WFG540H0A Instructions D'installation page 45

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Customer Service
section at www.whirlpool.ca.
KEYPAD FEATURE
CLOCK Clock
OVEN LIGHT Oven cavity light
TIMER Oven timer
SET/OFF
START Cooking start
CANCEL Range function
BAKE Baking and
roasting
4
FEATURE GUIDE
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
INSTRUCTIONS
This clock can use a 12- or 24-hour cycle. See "Oven Use" section.
1. Press SETTINGS once and wait 5 seconds.
2. Press START to change the time.
3. Press "3" for AM or "6" for PM.
4. Press the number keypads to set the time of day.
5. Press START.
While the oven door is closed, press the OVEN LIGHT keypad to turn the light on and off. The
oven light will come on when the oven door is opened.
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER.
2. Press the number keypads to set the length of time in hr-hr-min-min. Leading zeroes do not
have to be entered. For example, for 2 minutes, enter "2."
3. Press TIMER or START to begin the countdown. If enabled, end-of-cycle tones will sound at
end of countdown.
4. Press TIMER twice to cancel the Timer and return to the Time of Day. Do not press the
Cancel keypad because the oven will turn off.
5. If the Timer is running, but not in the display, press TIMER to display the countdown for
5 seconds.
The Start pad begins any oven function. If Start is not pressed within 30 seconds after pressing
a keypad, the function is canceled and the time of day is displayed.
The Cancel keypad stops any oven function except the Clock, Timer, Control Lock, and
Warming Drawer.
1. Press BAKE.
2. Press the number keypads to set a temperature other than 350°F (175°C) in 5° increments
between 170°F and 500°F (75°C and 260°C).
3. Press START.
4. To change the temperature, repeat steps 1 and 2. Press START or wait 5 seconds for the
change to take effect.
5. Press CANCEL when finished.