Andis AGR+ Mode D'emploi page 2

IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, including the
following: Read all instructions before using the Andis Clipper.
DANGER:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in, or
drop into, water or other liquid.
4. Except when charging, always unplug this appliance after using.
5. Always unplug this appliance before cleaning, removing or assembling parts.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Close supervision is necessary when this appliance is used on, or near children or individuals
with certain disabilities.
2. Use this appliance only for its intended use as described in this manual. Do not use attachments
not recommended by Andis.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. Never operate this appliance if it has
a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped
into water. Return the appliance to an Andis Authorized Service Station for examination and repair.
4. Keep cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen
is being administered.
7. Do not use this appliance with a damaged or broken comb or blade, as injury to the skin may occur.
8. To disconnect remove plug from outlet.
9. WARNING: During use, do not place or leave appliance where it may be (1) damaged by an
animal or (2) exposed to weather.
10. Plug charger directly into receptacle - do not use an extension cord.
11. Unplug charger before plugging or unplugging appliance.
12. Use of charger not sold by Andis may result in risk of fire, electric shock, or injury to person.
13. Do not disassemble charger; take it to an Andis Authorized Service Station when repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
14. The batteries in this clipper have been designed to provide maximum trouble-free life. However,
like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to
replace the batteries.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR COMMERCIAL USE
The symbol on this product means that it must be recycled. Please send this product to an
authorized recycling plant when it no longer serves its intended purpose.
2
Model AGRC Cord Pack Use
1. Models AGRC/AGR+ can be used with either the cord pack
or the battery.
2. Remove the transformer wall plug and clipper from the
carton.
3. With the clipper in the off position, insert the adapter plug
into the bottom of the clipper. Note that the adapter plug is
fitted with a tongue to align properly with the groove in the
clipper. Once the adapter plug and clipper are aligned, press
firmly together. You may hear a click as the adapter plug
contacts engage.
4. Plug the transformer wall plug into the AC outlet as identified
on the carton.
5. The clipper is now ready to be used.
PLUG CONNECTION DIAGRAM AND INSTRUCTIONS
Before fitting a plug into your appliance, please study the diagram.
https://manual-hub.com/
3