Geberit SIGMA80 Mode D'emploi page 14

EN
Actuate a flush
Actuate manual flush
When you approach the WC, the two
sensors on the actuator plate light up. A
manual flush is actuated by holding your
hand in front of one of the two buttons.
To actuate a flush, hold your hand approx.
15 cm in front of one of the two buttons.
There is no need to touch the actuator
plate.
1
For a full flush, hold your hand in
front of the long button on the left for
approx. 0.5–1 second.
2
For a partial flush, hold your hand in
front of the short button on the right
for approx. 0.5–1 second.
For testing purposes, a flush can also be
actuated with a Geberit app.
14
Actuate automatic flush
An automatic flush is actuated by stepping
away from the WC.
▶
Leave the user detection range.
The automatic flush actuation is activated
ex works. It can be deactivated at any time
with a Geberit app.
9007208999056779 © 04-2022
970.778.00.0(02)