Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
Tips:
1. Always use genuine parts to keep your warranty from being voided.
2. If the filter or nozzle becomes clogged, the vacuum will stop working shortly after being
turned on. To restore functionality, clean the filter or nozzle.
3. If the vacuum will not be used for an extended period, fully charge it, unplug its power
adapter, and store it in a cool, low-humidity environment away from direct sunlight. To avoid
over-discharging the battery, recharge the vacuum at least once every 3 months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Compartment
Before cleaning the dust compartment, disconnect the adapter and keep the vacuum's power
switch in the off position. The vacuum's cleaning ability will be reduced if the dust compartment
is filled to the "MAX" mark. To regain performance, empty the compartment.
To empty the dust compartment: Press the release button on the bottom of the compartment,
then empty its contents.
11
Care & Maintenance
Cleaning the Cyclone Assembly
1. Rotate the cyclone assembly in the direction illustrated to unlock it, then remove the cyclone
assembly.
1
2
2. Rinse the cyclone assembly with water until it is clean. To thoroughly dry the cyclone
assembly, keep it in a ventilated or cool place for at least 24 hours. Caution: Do not clean the
cyclone assembly in a dishwasher or washing machine, and do not attempt to dry it in a tumble
dryer, oven, microwave, or near an open fire.
3. Once it is dry, reinstall the cyclone assembly.
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
12
Publicité
