Advanced operation:
1. Temperature showing by LED display:
Press the temperature control button "
90°C, the corresponding indicator light on handle will be on. Then press the on/off switch button "
the kettle will start heating with different colour LED lights inside. When the desired temperature reaches,
the kettle will stop heating and send out beep sounds.
50°C: Green light.
70°C: Blue light.
80°C: Purple light.
90°C: Yellow-green light.
2. Keep warm function:
Press button "
" to choose your desired water temperature 50°C, 70°C, 80°C or 90°C, the corresponding
indicator light on handle will be on. Press and hold the on/off switch button "
the corresponding indicator light on handle begins to flash and the kettle starts heating with LED lighs
illuminating inside. When the set temperature is reached, beep sounds will be heard. The kettle will keep
the water warim for 30 minutes and then shut off automatically.
Note: Press and hold the on/off switch button "
temperature, by default the kettle will heat to 50°C for keeping warm.
3. This water kettle is equipped with a filter. You can add tea or fruit in to the filter before heating to brew
together with the water.
CLEANING AND MAINTENANCE
1.
Always let the kettle cool down first and disconnect the appliance from the power outlet before cleaning.
2.
Never immerse the kettle area or cord in water, or allow moisture to contact with these parts.
Cleaning appearance of housing:
Wipe the appearance of body with a mild and damp cloth or cleaner, never use a poisonous cleaner.
Never immerse the power base in water or other liquid for cleaning.
Descale regularly, preferably at least once a month and more frequently if your water is very hard.
To descale your kettle, use:
• white vinegar
- fill the kettle with half a litre of vinegar
- leave to stand for 1 hour without heating
• citric acid:
- boil half a litre of water
- add 25g of citric acid and leave to stand for 15 minutes.
Empty your kettle and rinse it 5 or 6 times.
" to choose your desired water temperature 50°C, 70°C, 80°C or
" for approx. 3 seconds without choosing the
- 6 -
",
" for approx. 3 seconds,