KERN KIB-TM Mode D'emploi page 44

7 I/O interface (optional)
(available for example in the KIB-A06 indicator light)
The I/O module has 2 inputs and 8 outputs.
It is possible to connect an indicator light to display the upper and lower limit values.
To connect the indicator light, make the following menu settings:
Menu item to activate the I/O module:
 Select the menu item "P0 CHK"  "rELAy" "on" and confirm by pressing
Setting the upper limit value:
 Select the menu item "P0 CHK"  "nEt H" and confirm by pressing
 Use the navigation buttons to enter the upper limit value and confirm by pressing
.
Setting the lower limit value:
 Select the menu item "P0 CHK"  "nEt L" and confirm by pressing
 Use the navigation buttons to enter the lower limit value and confirm by pressing
.
Manual input and output switching (test mode):
 Select the menu item "P9 Prt"  "io"  "o_tSt" (output test mode).
 Select the menu item "P9 Prt"  "io"  "i_tSt" (input test mode).
• The number on the left of the display designates the output number (connected
to OUT1-OUT8 or IN1-IN2).
• The number on the right of the display designates the current output status:
- "0" means deactivated
- "1" means activated (test voltage: 12V)
18
.
.
.
KIB-TM-ZB-e-1913