KERN KIB-TM Mode D'emploi page 39

As the IP address is saved to the KIB-TM we recommend using a static IP
address of the computer.
Now enter the IP address for the PC on the display unit:
 Menu item "P9Prt"  "oPt""riP_1-4" (IP address PC)
 Connect KIB-TM to network (router/switch).
 Start Balance Connection
 Start Expert mode (See chap. 2)
Adding an interface:
- Click on "Add" (green +)
- Click on "TCP/IP Server"
- Tab "IP Port Properties"
Set "TCP – Server listening/waiting"
Setting the port:
The settings must match the settings
of the KIB-TM:
„P9Prt"  „opt"  „rPort"
The port is user definable. It must not
be blocked by the router.
Click Apply, close window.
Enabling the port:
Right-click  Open console
 Data will be transferred
(The console is merely used to check
data transmission). All other output
methods can only be set in Balance
Connection.)
• If data transmission is not happening, check the settings described above and re-
enter as required.
KIB-TM-ZB-e-1913 13