Corsair iCue ELITE CAPELLIX XT Serie Mode D'emploi page 10

1. INSTALLING THE AMD sTRX4 MOUNTING BRACKET
E
Figure 1
2. INSTALLING THE AMD sTRX4 STANDOFF SCREWS
ENGLISH
I
Figure 2
J
8
> Remove the integrated Intel mounting
bracket (Figure 1).
> Install the AMD sTRX4 bracket by pushing
both sides into the slot on the pump until
secure (Figure 2).
NOTE: It is important that the AMD sTRX4
retention bracket be evenly secured on all
sides before installation.
> Attach the provided AMD sTRX4 standoffs
to the CPU socket.
> Tighten all four standoff screws until
firmly secure.