ohmex VVC 9023 Manuel D'utilisation page 52

EN
CLEANING AND MAINTENANCE
Wait until the filter (15) and the container (6) are completely dry before
reassembling.
• Re-assemble the filter (15) and the container (6) correctly.
• Place the container, complete with the filter, on the motor body (4) hooking the lower
part first.
• Push the upper part of the container (6) against the motor body (4) until you hear the
hooking "click".
Brush (11) cleaning
a. The rotating brush could collect yarns, hair, etc. through its bristles during use.
Clean it removing dirt from the bristles.
b. If necessary, it is possible to remove the rotating brush, releasing the retainer with the aid
of a coin.
c.
After it has been cleaned, re-position it correctly and close the retainer with the aid of a
coin.
Power cord replacement
• If the electric cord is damaged, please refer to
a certified electrician for its repair.
Neither provide for its replacement nor
for its repair on your own.
Batteries substitution
• This appliance contains Lithium batteries which, for safety reasons, are accessible solely to a
qualified technician. If the battery doesn't manage to maintain its charge anymore, it must
be removed. To replace the batteries,please refer to the nearest authorized assistance centre.
To remove the batteries, please refer to an authorized assistance centre.
Appliance disposal
• Do not dispose the appliance without previously having removed the batteries.
46
C.A.T.
VVC 9023