Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Protection category:
IP 65
Connecting line:
PUR hose cable
1000 V, 1m
Dimensions:
test electrode
with display part
240 x 62 x 39 mm
Weigth:
270 g (incl. battery)
6. Battery
6.1. Battery indication
The latest battery status is symbolised by a three-
stage battery indicator.
= battery filled
= battery semi-filled
(still many measurements possible)
= battery empty
The screen backlighting switches-
off automatically. Depending on
type of battery, you still can perform
at least 30-100 measurments.
Attention!
When the empty battery symbol flashes, then no
more measurements can be performed and the
battery has to be replaced immediately.
The device requires a 9 V block battery IEC 6 LR61
(alkali-manganese).
6.2 Replacing the battery
Loosen the screw at the back of the instrument
which secures the battery compartment lid, remove
the lid.
Let the battery drop out of the battery compartment
with its CAT IV protection cover and exchange it.
Therefore, snap the battery contacts onto the 9 V
block battery and insert the battery together
with the CAT IV protection cover into the battery
compartment. Put the lid back on the battery com-
partment and screw it tight.
Regularly make sure that the battery of your device
does not leak. In case it does, you have to replace
the electrolyte completely and to insert a new
battery.
In case of a long storage period, remove the battery
from the device.
Note:
Included in the scope of delivery is one battery.
These battery is not to be re-charged. Attempting to
recharge it may cause risk to personal safety and da-
mage to the equipment. The battery may not to be
opened. Depleted batteries must not be disposed
with the domestic waste. Please, return batteries at a
local retailer or municipal recycling depot. Return is
free of charge and required by law.
22
Publicité
Table des Matières
