Fixing problems
Problem
Possible cause
• Blunt blade.
Blade gets hot.
• Too much friction due to inadequate lu-
Motor does not
• Not connected to voltage supply
run.
Jittery operation,
• Blade damaged
heavy vibration
• Blade not firmly in stabilizer.
of the device
When in doubt, always seek out a WOLF Service location.
1
Before checking the hedge trimmer or carrying out work on the blade, remove the battery.
G
brication
Solution
• Go to a WOLF Service location.
• Oil blades
• Check the power supply and have
electrician perform repairs if neces-
sary.
• Go to WOLF Service location.
• Go to WOLF Service location.
17