KSIX URBAN 3 Manuel D'utilisation page 2

Charge
To charge the smartwatch, align its contact base (on the back of the smartwatch) with the
charging base. Please, notice that the magnetic charger includes two little metallic pieces
that must be in contact with the two metal dots on the contact base.
Turning on and o
To turn on the smartwatch, long press the button in the upper right corner. A bar will
appear on the screen and it will gradually turn yellow. Please, long press until the bar is fully
yellow and disappears from the screen.
To turn o the smartwatch, go back to the home screen and long press the bottom in the
upper right corner. The smartwatch will vibrate and a confirmation message will appear on
screen. If you do not want to turn o the device, select the option in grey and you will be
redirected to home screen. If you want to turn o the device, select the option in red and
the smartwatch will turn o straight away.
You can also turn o the smartwatch by opening Settings and then Power o .
Initial configuration
Click here to download the SMART-TIME PRO App from Google Play or App Store:
1. Open the settings of your device and turn on Bluetooth.
2.Download the SMART-TIME PRO App.
3.Follow the instructions in the app and create a profile.
Note: If your smartphone cannot pair the smartwatch, enter settings on your mobile
phone and check if the signal of Urban 3 is available. If it appears on the list, it means the
signal works properly. Please, check if the smartwatch has been paired with other phones
before. In case it is paired with any other f your mobile cannot pair the watch, click
Settings in your mobile phone and check whether there is signal of F3 Pro. If yes, it means
there is no problem with the Bluetooth signal. Please, check if the watch is paired with
other phones. Please unbind it. IOs device users should click Setting – ignore this device
and then pair it.
Firmware update
After having made some improvements to the Firmware of our Urban3 smartwatch, the
user will have to upgrade to the latest version. To complete this update you must download
the Smart Time Pro App.
Once the app has been downloaded, the following steps must be followed to pair the
smartwatch with the app:
Once the smartwatch has been inserted in the charging base,
it will vibrate and a charging indicator will appear in the
watch screen within 5 seconds and the smartwatch will
vibrate.
It takes 2 hours to charge the smartwatch completely. Once
the charge has been completed, the battery icon will look
fully colored.
Note: Please, clean the contact base with a dry cloth before
charging the smartphone, as any rest of sweat might damage
the metal dots on the contact base.
the smartwatch
Video Tutorial: Connect your Urban 3 with the APP
Click on the following icon to access a step-by-step video tutorial on
how to pair your Urban 3 with the SMART-TIME PRO APP.
SMART-TIME PRO