KSIX URBAN 3 Manuel D'utilisation page 4

icon on your smartwatch will turn blue and orange.
3. Open the APP and select "Device". Then, select "Add new device".
4. A device called F3 Pro should appear on your list. Select it.
5. A confirmation message will appear on your smartwatch screen to synchronize it with
your mobile phone. Please, allow the synchronization.
6. A synchronization message might appear on the screen of your device. Please, enable
synchronization.
7. If necessary, accept any notification permit that the smartwatch might require.
Pairing the smartwatch with Android devices
1. Enable the Bluetooth function on your smartphone and smartwatch.
2. Open the APP and select "Device". Then, select "Add new device".
3. A device called F3 Pro should appear on your list. Select it and the Bluetooth icon on
your smartwatch will turn blue and orange.
4. A synchronization message might appear on the screen of your device. Please, enable
synchronization.
5. If necessary, accept any notification permit that the smartwatch might require.
Functions
The Urban 3 smartwatch includes several functions related to health and daily life. Slide left
to open heart rate monitoring (slide once), physical activity (slide twice), sleep monitoring
(slide three times) and weather data (slide four times). If you slide left one more time after
sliding four times, you will go back to home screen. Slide right to open a shorter menu. To
enter the complete functions menu, open the home screen and swipe up. You can move
around the menu sliding your finger on the screen.
Note: Please, note that health parameters can only be measured when the smartwatch is
properly worn. In case it is not put correctly, the data recorded will not be accurate or no
data will be recorded at all.
Change of watch theme
The smartwatch includes 6 di erent watch themes. Rotate the turn on/o button to choose
one of the included themes. More incredible themes can be downloaded from the APP:
first, open the App and select "Device". Then, select "Dial". A selection of online and
customizable themes will appear on the screen. To download one, just press "Sync" on your
mobile phone and it will automatically be applied to your smartwatch.
Sports
This Urban 3 smartwatch includes 10 sport modes, including running, walking, cycling,
climbing, treadmill, yoga, spinning, basketball, football and badminton.
In each mode, some parameters like steps walked, exercise time or calories are measured.
To record data, press the turn on/o button when you finish your exercise. A confirmation
message will appear: please, confirm to record data. Data is recorded in "Record", at the
end of the sport modes list.
Note: Some sport modes might require the smartphone GPS to be activated in order to
show the itinerary walked. There might be some divergences between the exact itinerary
and the itinerary shown on the app. If GPS is not activated, these sport modes might not
work properly or the data might not be recorded on the app.
Heart rate
Open the watch menu and select the heart rate monitoring function. Heart rate will be
measured automatically and results will be on screen within a few seconds.
Connect APP and set the automatic measurement period and intervals (each 15/30/60/120
minutes monitoring).