KSIX URBAN 3 Manuel D'utilisation page 5

What to do if the heart rate is not being measured
It is possible that the watch does not get a suitable heart rate signal. In case this rate is not
being measured, a dotted line will appear on screen instead. If this happens, please confirm
that the watch is being properly worn, and adjust it as necessary so that it is well placed and
well tied on your wrist. Once the watch is adjusted, the watch will automatically get the data
when entering the heart rate monitoring function. If the watch does not show any hear rate
data even if the above instructions have been followed, please check if the heart rate
monitoring function has been turned on at SMART-TIME PRO APP.
Blood pressure
Open the watch menu and select the blood pressure monitoring function. Select "play" and
wait for a few seconds until the results are shown on screen.
Blood oxygen
Open the watch menu and select the blood oxygen monitoring function. Select "play" and
wait for a few seconds until the results are shown on screen.
Make/answer/reject calls
Before using these functions, make sure that all permits on calls have been given to the
APP and that both the incoming calls and contacts synchronization options have been
enabled.
Receive calls
It is extremely important to have the incoming calls function enabled to receive calls. Calls
will appear in real time on screen and the watch will vibrate. Calls can be accepted or
rejected from the watch by pressing the green and the red button respectively. In case the
call is accepted, it can be ended by pressing the red button. If the call is rejected, a call
notification will appear on the screen of your smartwatch.
In case the incoming calls function is not enabled, the smartwatch will only show
notifications on calls received, but it will not emit real time signals or vibrate.
Make calls
There are three options available to make calls:
- Make a call to a contact: The smartwatch can store a list of 20 contacts previously chosen
from the APP. To create the contact list that will be available on the watch, open the APP
and select "Sync contacts". Then, select the "+" sign to import up to 20 contacts from
your phone contact list. Once the list has been updated, access the call menu on your
watch and select "contacts" to initiate an automatic synchronization. Then, select the
contact you want to call and the call will be initiated automatically. Press the red button
once the call has been initiated to end it.
- Calls history: Access the call history, select a contact and phone them back. Press the red
button once the call has been initiated to end it.
- Dialer: Dial the number you want to call and press the green button to initiate the call.
Press the red button once the call has been initiated to end it.
Message notification
Please, make sure that the message notification option is enabled on the APP. It is possible
to select which notifications you want to receive on you watch by modifying the permits on
the APP. Then, messages and notifications received on your mobile will be showed on the
watch in real time.
Music control:
To control the music player, as well as songs and volume, select the music control function
on the watch's functions menu. It is possible to pause, play, skip and go back to a song, and
to raise or lower the volume.
Alarm clock
A maximum of 5 alarms can be set on the watch. To set an alarm, open the APP and select
"Alarm clock". Then, select "Add" and customize your alarm. Once the alarm is set on the
APP, it can be activated or deactivated from the watch.
Schedule
A maximum of 5 events can be added to the watch. To add an event, open the APP and
select "Schedule". Then, select "Add" to customize your event. Once the event is added to
the APP, it can be consulted from the watch. Schedule can be added in APP and sync to
smart watch which will remind users on time.
Stopwatch