Télécharger Imprimer la page

Vivreau PURITY 450 Quell ST Mode D'emploi page 15

Publicité

Les langues disponibles

Les langues disponibles

Resetting the display unit
To operate the display unit it has to be removed from the connecting fittings. Slide the
display housing up approx. 0.4 inches (10 mm) and pull off the display unit to the front.
The display unit is operated using a button on the back of the display unit.
If this button is pressed (> 10 seconds), the data set on initial
installation will be accepted again, and the capacity, bypass
setting and input date are all updated.
Note: This automatically sets the monthly limit to 12 months.
Note: If no input is made within 30 seconds, the display will return to standby or operating mode
without accepting amended parameters.
Insert display unit from front at a height of approx. 0.4 inches (10 mm) and slide down.
The loops on the display part must be inserted in the grooves on the measuring head.
6.1 Removing the Filter Cartridge
Switch off the power supply of the terminal equipment (remove plug).
Close the inlet valve
Remove pressure from the system by opening flush valve
Note: Insert the free end of the flush hose in a bucket. If the escaping water is more than
0.13 US gallons (0.5 litres), the inlet valve is not completely closed or is blocked with scale.
Place the pressure vessel lid
Note: Do not turn the lid horizontally on its head.
Stand on the kick loops
by the mantle handles
Take your feet off the kick loops
on the mantle handles
Remove exhausted filter cartridge
Place the exhausted filter cartridge
the remaining water (> 5 min.).
Lock the exhausted filter cartridge
cartridge and dispose according to the local regulations (see chapter 2.4).
on the inlet hose
7
Close flush valve
9
Stand on the kick loops
Open the pressure vessel lid by pressing the lock
it anticlockwise as far as it will go.
vertically on both lid handles
3
with both feet while turning the pressure vessel
12
as far as it will go.
16
and press the pressure vessel
12
.
16
from the pressure vessel
2
in the sink with the connection facing down to drain
2
with the transport protective cap
2
.
6
.
9
12
.
20
and turning
15
counter-clockwise
1
down with both hands
1
.
1
of the new filter
18
EN
11

Publicité

loading

Ce manuel est également adapté pour:

Purity 600 quell stPurity 1200 quell st