Publicité
Les langues disponibles
Les langues disponibles
STM 4 = PURITY 450 Steam*
STM 6 = PURITY 600 Steam*
STM 12 = PURITY 1200 Steam*
FIN 6 = PURITY 600 Finest*
FIN 12 = PURITY 1200 Finest*
*Corresponding PURITY filter systems not for sale in North America
•
Water hardness unit and water hardness value
The following units of hardness may be selected for the various types of filter system:
Unit of carbonate hardness for filter system types STD
°KH (German unit of hardness)
°EH (English unit of hardness)
°FH (French unit of hardness)
gpg (American unit of hardness)
mg/L (international unit of hardness)
Unit of total hardness for filter system type FIN* may be
°DH (German unit of hardness)
°EH (English unit of hardness)
°FH (French unit of hardness)
gpg (American unit of hardness)
mg/L (international unit of hardness)
*Corresponding PURITY filter systems not for sale in North America
•
Monthly limit 2–12
•
Reminder function filter usage period in months
Irrespective of the remaining capacity display function, you can set a monthly limit of 2–12
months to activate a reminder function for filter replacement. If the monthly limit has been
reached up to a month before the export of the set time limit, it is signalled by the date field
flashing. Factory set to 12 months.
Example: When set to 9 months, the date field starts to flash on the display after 8 months.
Operating the display unit
To operate the display unit, it must be removed from the connecting fittings.
Slide the display housing up approx. 10 mm (0.39") and pull off the display unit.
The display unit is operated using a button on the back of the display unit. The
display unit is supplied in standby mode. To activate the display, press the button
on the back once briefly and then reset after inputting the parameters.
Carbonate Hardness
Exhaustion after months
and
STM:
Type/Filter System Size
Date field
EN
7
Publicité
