Publicité
Les langues disponibles
Les langues disponibles
1
2
3
The middle panels (
rative frame. When you install them, make
sure that the screen-printing zone looks to
the inner side of the door. Make sure that
after the installation the surface of the glass
2
panel frame (
-
ing zones is not rough when you touch it.
Make sure that you install the panels of
glass in the seats correctly (refer to the illus-
tration).
Replacing the oven light bulb/cleaning
the glass cover
Warning! Be careful! There is the risk
of electrical shock!
2
3
-
) have a deco-
3
) on the screen-print-
1. Turn the glass cover anti-clockwise to
remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with appli-
cable 300°C heat-resistant oven light
bulb. New oven light bulb must have the
same parameters as your previous one.
4. Install the glass cover.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
electrolux 17
Publicité
