Important! Only use the meat probe
supplied or genuine replacement parts.
1. Activate the appliance.
2. Put the tip of the meat probe into the
centre of the meat.
3. Put the plug of the meat probe into the
socket on the side wall of the oven.
The display shows Meatprobe .
4. Touch + or - in less than 5 seconds to
set the core temperature.
5. Set the oven function and, if necessary,
the oven temperature.
The meatprobe must stay in the meat
and in the meatprobe socket during the
cooking process.
6. When the meat reaches set core tem-
perature, an acoustic signal sounds.
The appliance deactivates automatically.
Use a sensor field to stop the signal.
7. Remove the meatprobe plug from the
socket and remove the meat from the
oven.
Warning! The meat probe is hot! There
is the risk of burns! Be careful when
you remove the tip and plug of the
meat probe.
8. Switch off the appliance.
For meat programmes with the meatp-
robe , refer to automatic programmes .
My Programmes menu
You can store your favourite settings like
duration, temperature or oven function.
They are available in My Programmes
menu. You can store 20 programmes.
Clock functions
Symbol
Function
Minute Minder
Duration
End Time
You can use Duration and End Time at
the same time, if the appliance is to ac-
tivated and deactivated automatically
later.
Storing a programme
1. Activate the appliance.
2. Select the oven function or Assisted
Cooking function.
3. Touch
display shows " SAVE ". Touch OK to
confirm.
4. The display shows the first free memory
position.
Touch OK to confirm.
5. The first letter flashes.
Touch + or - to change the letter. Touch
OK to confirm.
6. Touch
the right or to the left. Touch OK to con-
firm.
The letter flashes.
7. Repeat steps 5 and 6 again to write
name of the program.
Touch and hold OK to save.
You can overwrite a memory position in
storage. (Refer to the section „Storing a
programme". At step 4 touch
want to overwrite.)
You can change the name of a Pro-
gramme in the menu " Edit Programme
Name ".
Activating the programme
1. Activate the appliance.
2. Select My Programmes menu. Touch
OK to confirm.
3. Select your favourite programme name.
Touch OK to confirm.
To set a countdown (max 2 hours 30 minutes). This function
has no effect on the operation of the appliance.
To set how long the appliance has to be in operation (max. 23 h
59 min).
To set the switch-off time for an oven function (max. 23 h 59
min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
again and again until the
or
to move the cursor to
to choose memory position you
Description
electrolux 11
or