Publicité
Les langues disponibles
Les langues disponibles
12 electrolux
Setting the clock functions
1. Activate the appliance. Set the heating
function and, if necessary, the tempera-
ture.
2. Touch
again and again until the
display shows the necessary clock func-
tion and the related symbol.
3. Touch + or - to set the necessary time.
Touch OK to confirm.
When the appliance operates at the set
time, an acoustic signal sounds. The
appliance deactivates. The display
shows a message.
4. Touch a sensor field to stop the signals.
With the Minute Minder you must acti-
vate the appliance to set the clock
function. You do not have to set a
heating function.
With the Duration and End Time , after
90 % of the set time, an acoustic signal
sounds. The appliance deactivates.
The appliance uses the residual heat to
continue the cooking process until the
time is completed (3-20 minutes).
When you use Meat Probe, Duration
and End Time do not work.
Time Extension
The Time Extension makes the oven func-
tion continue after the set time ends.
• Applicable for all oven functions with Du-
ration or Weight Automatic .
• Not applicable for oven functions with
Meatprobe .
Activating the function:
1. When the cooking time ends, an acous-
tic signal sounds. Touch any sensor
field.
2. The display shows the message for
Time Extension for five minutes.
3. Touch
to activate.
4. Set Time Extension period. Touch OK
to confirm.
SET+GO
SET+GO function lets you set an oven
function (or programme) and use it later
with one touch of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Touch
again and again until the
display shows Duration .
4. Set the time.
5. Touch
again and again until the
display shows SET+GO .
6. Touch OK to confirm.
To start SET+GO touch any sensor field
(except
). The set oven function starts.
When the oven function ends, an acoustic
signal sounds.
When the oven function operates, the
function Key Lock is on.
You can activate and deactivate the
SET+GO function in the Basic Settings
menu.
Heat+Hold
The Heat+Hold function keeps prepared
food warm at 80° for 30 minutes. It acti-
vates after the baking or roasting procedure
ends.
Conditions for the function:
• The set temperature is more than
80°C.
• The function duration is set.
Activating the function
1. Activate the appliance.
2. Select the oven function.
3. Set the temperature above 80°C.
4. Touch
again and again until the
display shows Heat+Hold . Touch OK
to confirm.
When the function ends, an acoustic signal
sounds.
The Heat+Hold function operates for 30 mi-
nutes.
The Heat+Hold function stays on if you
change the oven functions.
You can activate or deactivate the
function in Basic Settings menu.
Key Lock
The Key Lock prevents an accidental
change of the oven function .
Activating the Key Lock
1. Activate the appliance.
2. Set the oven function.
3. Touch
again and again until the
display shows Key Lock
4. Touch OK to confirm.
The Key Lock is active.
Publicité
