Télécharger Imprimer la page

OHAUS -D3K1S Manuel D'instructions page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Defender Series Base
Troubleshooting
Aside from installing components and leveling adjustments, the Defender Series Base does not require any other
adjustments as shipped from the factory.
Operational difficulties that may be encountered can often be traced to simple causes such as:
Loose or incorrect wiring connections
Failure to remove the shipping spacers
Obstructions to the base frame
Unstable environments
Incorrect calibration or setup of the indicator
If the troubleshooting section does not resolve or describe your problem, contact your authorized OHAUS service
agent. For service assistance or technical support in the United States, call toll-free 1-800-526-0659 between 8:00
AM and 5:00 PM EST. An OHAUS product service specialist will be available to provide assistance. Outside the
USA, please visit our web site to locate the OHAUS office nearest you.
TECHNICAL DATA
Technical Specifications
The technical data is valid under the following ambient conditions:
Operating temperature: -10ºC to +40 ºC (14 °F to 104 °F)
Relative humidity: 100% relative humidity, non-condensing
Altitude: Up to 2,000m
Note: Not all models may be available in your area. Check with your local OHAUS representative.
MODEL
Capacity
Approved Resolution
Safe Overload Capacity
Pan Dimensions
Base Construction
Repeatability (std.deviation)
Linearity
Load Cell Capacity
Load Cell Cable
Load Cell Type
Load Cell Excitation
Load Cell Rated Output
Load Cell Protection
Net Weight
Shipping Weight
TABLE 2.1 SPECIFICATIONS
i-D3K1S
i-D6K1S
3 kg
6 kg
254 x 254 mm
10 x 10 in
316 stainless steel top and bottom frame, hermetically
sealed IP68/IP69K stainless steel loadcell.
10 kg
10 kg
50cm L x 6-wire
6 kg / 13.2 lb
7 kg / 15.4 lb
i-D15K1R
i-D30K1R
i-D60K1L
15 kg
30 kg
OIML 3000e
150% of capacity
305 x 305 mm
12 x 12 in
316 stainless steel removable
weighing platform with 316
stainless steel frame, hermetically
sealed IP68/IP69K stainless steel
loadcell.
2d
±2d
20 kg
50 kg
350 Ohm, SST, single point
3.3-15V DC/AC
2mV/V
IP69K
7.5 kg / 16.5 lb
8.5 kg / 18.7 lb
i-D150K1L
60 kg
150 kg
400 x 500 mm
15.7 x 19.6 in
100 kg
200 kg
1m L x 6-wire
16 kg / 35.3 lb
18 kg / 39.7 lb
EN-3

Publicité

loading