Publicité
AVIS À L'UTILISATEUR:
l'équipement. Elles sont destinées à assurer votre protection. Toutes les décalcomanies doivent être main-
tenues en bon état. Veillez à remplacer toute décalcomanie endommagée ou illisible.
!
WARNING
DO NOT OVERLOAD CIRCUIT.
ALWAYS ELECTRICALLY GROUND THE CHASSIS
OR ADAPTOR PLUG.
DO NOT DEFORM PLUG OR CORD.
FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.
KEEP COMBUSTIBLES AWAY.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE OR SHOCK HAZARD.
READ THE ENTIRE OPERATING MANUAL
BEFORE USING THIS PRODUCT
00986.0002E 5/98 ©1994 Bunn-O-Matic Corporation
00986.0002
MAXIMUM RINSE WATER TEMPERATURE: 170˚F (76.6˚C)
Use Bunn-O-Matic tubing, part number 32759.10XX
(See Illustrated Parts Catalog for complete part number)
for hot water connection.
RINSE WATER
CONNECTION
Hot Water
Connection
(See Caution)
Install Water
Strainer Here
MAIN WATER
CONNECTION
Cold Water
Connection
Hot Water Rinse Connection
NOTES:
•
Use Bunn-O-Matic tubing, part number 32759.10XX for all connections.
(See Illustrated Parts Catalog for complete part number)
•
Clamp all hose connections with Bunn-O-Matic part number 21275.0003 (hose clamp)
Prenez soin de lire et de suivre toutes les consignes dans ce manuel et sur
RINSE WATER
CONNECTION
MAIN WATER
CONNECTION
Cold Water
Connection
Install Water
Strainer Here
Alternate Connection
(When Hot Water source is not available)
3
Moving Parts.
Risk Of Electrical Shock.
Do not operate
Disconnect power before
unit with this
servicing unit.
panel removed.
27442.0000
CHARGE
Type R134A, Amount 10 oz (283 gm)
Design Pressures: High 335 psi (23 bar)
Low 88 psi (6 bar)
33461.0000
(Anciens modèles sans
soupape de prise d'eau)
3/8" x 3/8" x 3/8" Barb Tee
B.O.M. PN 32750.0000
(may be installed internal or
external to the dispenser)
34054.0000
38218.1 110606
Publicité
