Proline UFZ171 Manuel D'utilisation page 62

7. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
8. Re-fit the upper hinge while refitting the upper door. Do not fully tighten
the screws.
9. Check the door is aligned horizontally and vertically and that all seals make
good contact with the cavity all the way around the cavity opening before
finally tightening the hinges. Re-fit the hinge cover and screw cover. Re-
adjust the levelling feet, if necessary.
10. Detach the door gasket and then attach it after rotating.
UFZ171_op.indd 59 UFZ171_op.indd 59
59
5/9/2023 11:09 AM 5/9/2023 11:09 AM