Proline UFZ171 Manuel D'utilisation page 55

BEFORE INSTALLING THE FREEZER
Before connecting your freezer to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your
home.
Ensure that the plug remains accessible after installation.
The appliance must be grounded. The manufacturer is not responsible for
damages that may occur as a result of usage without grounding.
Install the appliance in a dry, well-ventilated room. The installation location
should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker,
radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of
airspace on each side of the cabinet.
For uneven surfaces, front feet can be aligned.
52
UFZ171_op.indd 52 UFZ171_op.indd 52
INSTALLATION
5/9/2023 11:09 AM 5/9/2023 11:09 AM