Electrolux SC310 Notice D'utilisation page 63

4. OPERATION
4.1 Control panel
Temperature regulation button
1
Super Cool button
2
Alarm indicator
3
4.2 Switching on and off
To switch on the appliance, insert the
plug into the wall socket.
When the appliance is
switched on for the first time,
the interior light may turn on
after a one-minute delay due
to opening tests.
To disable all the functions,
activate the Standby mode.
Refer to the "Standby mode"
section.
To switch off the appliance, unplug it.
4.3 Temperature regulation
Recommended set temperature is:
• +4°C for the fridge.
The temperature range may vary
between 2°C and 8°C.
To set the temperature of the appliance,
press the temperature regulation button
repeatedly until you reach the desired
temperature of the compartment.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
1 2 3 4
Temperature indicators
4
A medium setting is generally the most
suitable one.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
4.4 Super Cool function
If you need to insert a large amount of
food at ambient temperature into the
fridge compartment, for example after
doing the grocery shopping, we suggest
activating the Super Cool function to cool
the products more rapidly and to avoid
warming another food which is already in
the compartment.
To activate this function, press
repeatedly the temperature regulation
button until the Super Cool indicator
appears.
This function stops automatically after a
maximum of 5 hours or when the sensor
reaches the lowest temperature for the
fridge compartment (1-3°C).
You can deactivate the Super Cool
function before its automatic end by
repeating the procedure until the Super
Cool indicator turns off or by selecting a
different temperature of the fridge
compartment.
ENGLISH 63