Publicité
Les langues disponibles
Les langues disponibles
WARNING !THE HIGH-PRESSURE JET MAY BE DANGEROUS WHEN
HANDLED IMPROPERLY. THE JET MAY NOT BE DIRECTED
TOWARDS LIVING BEINGS (PERSONS, ANIMALS), LIVE
EQUIPMENT OR THE MACHINE ITSELF.
BECAREFUL OF THE KICKBACK FORCES IF THEY EXCEED 20 N.
Hold with both hands.
The trigger gun safety lock prevents the trigger from being engaged accidentally.
The safety feature DOES NOT lock trigger in the ON position.
5. TRANSPORTATION
If shipping, use the original packaging wherever possible.
High pressure cleaner and its accessories in an area with a room temperature of at least 5°C.
The pump in the unit can be permanently damaged if it freezes.
6. WINTERING & STORAGE
6.1 STORE THE MACHINE
Store the machine and its accesories in a dry and well-ventilated place.
When placing the machine out of service for an extended period of time, remove the cleaning
agent and drain all of the water left in the hoses.
7. MAINTENANCE
7.1 CLEANING
CAUTION ! ALWAYS DISCONNECT THE PLUG FROM THE POWER
SOURCES BEFORE CARRYING OUT ANY WORK ON THE APPLIANCE.
Cleaning the product : illustration 4.1
Clogging of the spray tips causes the pump pressure to be too high and cleaning is immediately
required. You can clean the spray tips by carefully inserting a needle, or a thin, sharp instrument
(e.g. paperclip) into the tip to rid it of deposits.
You can also had the cleaning tip on the accessories.
Cleaning the filter :
Inspect the intake filter and detergent (if fitted) before each use, and clean in accordance with
the instructions.
Inspect the seal status of inlet nozzle, spear and 5 in 1 nozzle, remove dirt and debris from the
seals, if there have any crack/damage marks on it, which will lead the water leakage, please
replace with the new one accordingly. Illustration 4.3
We additionally offer some spare seals in the machine for the free replacement. Put the 5 in 1
nozzle, spear, inlet nozzle in a clean place, protected from damage.
207
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicité
