Publicité
Les langues disponibles
Les langues disponibles
OPERATING AND MAINTENANCE MANUAL
CENTRIFUGAL ELECTRIC PUMP INOX SERIES
4. ELECTRICAL CONNECTIONS
The single-phase motor includes a thermal protector. For three-phase motors, protection must be pro-
vided by the user or installer.
•
The plug on the pump cable must match the socket. Never modify the plug in any way. Do not use
any adapter plugs. Unmodified plugs and matching plugs will reduce the risk of electric shock.
•
Avoid body contact with earthed surfaces.
•
Do not abuse cord. Never use the cord for carrying, pulling or unplugging the pump. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
•
When operating a pump outdoors, use an extension cord suitable for outdoor use.
•
Use of a cord suitable for outdoor use reduces the risk of electric shock.
•
The pump is equipped with a compatible plug. The power supply in your country must comply with
international regulations.
•
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid hazards.
Unsuitable extension cords can be dangerous.
If an extension cord is used, it must be suitable for outdoor use and the connection must be kept dry
and off the ground. It is recommended that this is done using a cable reel that keeps the plug at least
60 mm above the ground.
5. MAINTENANCE
Our pumps do not require specific maintenance, but the following operations are recommended:
•
In case of temporary installation, the pump should be cleaned with clean water after use.
•
In case of permanent installation, it is necessary to check every 3 months that the starter mecha-
nism is working properly.
•
Regularly remove any dirt that may accumulate in the crankcase.
•
Do not expose to frost.
•
Avoid dry running.
•
Do not abuse the cable.
•
Never use the cable to carry, pull or unplug the pump.
•
Clean the pump regularly if the suctioned liquid produces sediment.
•
Avoid knocks, do not drop the pump.
6. TRANSPORT
The machines in question shall be supplied in suitable packaging to ensure proper protection during
all stages of transport. If, on receipt of the goods, the packaging is damaged, it is necessary to ensure
that the machine has not been damaged during transport and that it has not been tampered with.
In the event of damage to the equipment or if any part of the machine is found to be missing, the
www.proindecsa.com / proindecsa@proindecsa.com
⚡
WARNING
9
Publicité
