Publicité
Les langues disponibles
Les langues disponibles
OPERATING AND MAINTENANCE MANUAL
CENTRIFUGAL ELECTRIC PUMP INOX SERIES
transporter and the manufacturer must be notified immediately and the corresponding photographic
documentation must be provided. Materials used to protect the equipment during transport must be
disposed of using the disposal channels existing in the country of destination.
7. LIFTING AND DISPLACEMENT
For all lifting and moving operations, the operator must use the minimum personal protection devices
required for the operations to be carried out (safety footwear, gloves and protective helmet).
Machines with a weight of more than 25 kg must be moved using suitable handling systems with a ca-
pacity greater than the weight of the machine to be handled (see the weight indicated on the packaging).
If it is necessary to use belts for handling the machine, these must be in good condition and must be of
adequate strength for the weight of the machine to be handled.
Pumps weighing <25 kg may be lifted manually by the operator without the aid of lifting equipment.
9. STORAGE
The equipment must always be stored in covered, not excessively humid places, protected from atmos-
pheric agents and with temperatures between -10°C and 40°C, avoiding direct exposure to sunlight. If
the machine is to be stored for long periods, it is advisable not to remove it from its packaging.
www.proindecsa.com / proindecsa@proindecsa.com
10
Publicité
