ENGLISH
12
Using the device
Positioning the device
You position the BlueTouch Pain Relief Patch on your body with one of the
straps supplied with the device. There is a special strap for treatment of the
upper back and a special strap for treatment of the lower back.
Note: Do not wear multiple layers of clothing or tight or thick clothing over the
BlueTouch Pain Relief Patch.
Positioning the lower back strap
To place the BlueTouch Pain Relief Patch in the lower back strap, follow the
steps below.
1
Place the lower back strap and the BlueTouch Pain Relief Patch in
front of you on a table. Slide the left side of the BlueTouch Pain Relief
Patch behind the elastic edge of the opening in the strap.
2
Then slide the other end of the BlueTouch Pain Relief Patch behind
the opposite elastic edge of the opening so that the whole patch is
inside the lower back strap. Check to make sure that material of the
strap does not cover the LEDs. If necessary, shift the BlueTouch Pain
Relief Patch a little.
3
Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is clean, entirely dry and
free from creams, lotions and other cosmetics.
4
Wrap the lower back strap with the BlueTouch Pain Relief Patch in it
around your waist with the treatment area of the device facing your
back.
5
Fasten the lower back strap with the Velcro strips on both ends of
the lower back strap.
Note: Make sure the BlueTouch Pain Relief Patch in the strap is located on the
area to be treated and the treatment area is in contact with the skin.
6
If the lower back strap does not fit around your body, you can do the
following.