Samsung HW-S800B Manuel D'utilisation page 4

04 USING A WIRED
CONNECTION
HDMI to Micro HDMI Cable
1
HDMI IN
(ARC)
Connecting using an HDMI to Micro HDMI Cable
NOTE
• When using an HDMI to Micro HDMI cable, take
caution not to break the cable terminal.
• When the TV sound is not output, press the
Function) button at the top of the Soundbar or the
(Source) button on the remote control to select
the "TV ARC" mode.
• The recommended cable is High Speed HDMI Cable
with Ethernet.
Using the Q-Symphony Function
For Q-Symphony, the Soundbar syncs with a Samsung
TV to output sound through two devices for optimum
surround effect. When the Soundbar is connected, the
menu, "TV+Soundbar" appears under the Sound Output
menu of the TV. (The message above differs with the TV
model.)
• TV menu example: TV + [AV] Soundbar series name
(HDMI/Wi-Fi)
NOTE
• It can operate according to the Codec supported by
TV.
• This function is supported only when the HDMI Cable
or Wi-Fi is connected.
• The message displayed may differ with the TV model.
• Ensure that your TV and Soundbar are connected to
the same wireless router/frequency.
• This function is available in some Samsung TVs and
some Soundbar models.
Using the Spacefit Sound
Provides optimized sound quality by analyzing the
listening spaces.
05 USING A WIRELESS
Connecting via Bluetooth
SERVICE
HDMI
(ARC)
1
(Multi
NOTE
• If asked for a PIN code when connecting a Bluetooth
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a
1. Connect your mobile device (smartphone, tablet, etc.)
2. Install and launch the SmartThings app on your
3. Follow the instructions in the app screen on the
06 TROUBLESHOOTING
Before seeking assistance, check the following.
Soundbar does not turn on.
• Check whether the power cord of the Soundbar is
ENG - 4
CONNECTION
Top of the Soundbar
OR
Red → Green →
Blue Blinks
Pairing Connection is complete
"Ready to connect via Bluetooth."
device, enter <0000>.
wireless network (Wi-Fi), the SmartThings app is
required.
to the Wi-Fi network the TV is connected to.
mobile device (smartphone, tablet, etc.).
mobile device to connect the Soundbar to your Wi-Fi
network.
correctly inserted into the outlet.
5 sec
OR
Cyan Blinks X3