Publicité
Les langues disponibles
Les langues disponibles
Operation
1
Draining the tank
(Figure 2, 4)
WARNING: Risk of unsafe
operation. Air tanks contain high
pressure air. Keep face and other
body parts away from outlet
of drain. Use eye protection
[ANSI Z87.1 (CAN/CSA Z94.3)]
when draining as debris can be
kicked up into face.
WARNING: Risk from noise.
Use ear protection (ANSI
S12.6 (S3.19) as air flow noise
is loud when draining.
WARNING: Risk of bursting.
Water will condense in the
air tank. If not drained, water
will corrode and weaken the
air tank causing a risk of air
tank rupture.
NOTICE: Risk of property
damage. Drain water from air
tank may contain oil and rust
which can cause stains.
FIGURE 4
1.
Set the Auto/Off switch (A, Figure 2) to
"Off".
2.
Slowly bleed the air from the air tank
and air distribution system until tank
pressure is approximately 20 psi.
3.
Drain water from air tank by opening
drain valve (F) on bottom of tank.
4.
After the water has been drained, close
the drain valve. The air compressor can
now be stored.
F
12
NOTICE: All compressed air
systems generate condensate that
accumulates in any drain point (e.g.,
tanks, filter, aftercoolers, dryers). This
condensate contains lubricating oil
and/or substances which may be
regulated and must be disposed of
in accordance with local, state, and
federal laws and regulations.
NOTICE: If drain valve is
plugged, release all air pressure.
The valve can then be removed,
cleaned, then reinstalled.
Publicité
