Cleaning And Maintenance; Technical Data - Beurer HC 25 Mode D'emploi

> After each use/at each break, always switch off the travel hair dryer at the sliding switch [7] (set-
ting 0).
> After each use, pull the mains plug out of the socket.
> Allow the device to cool down.
> Do not wind the mains cable around the device!
> Store the device in a dry place out of the reach of children.
> The device can be hung on a hook using the hanging eyelet [4].
Note
For best results with the ion technology, use the hair dryer without an attachment.

8. Cleaning and maintenance

Cleaning
Important
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive, or corrosive cleaning
products or hard brushes.
• The casing of the hair dryer and the accessories may be cleaned with
a soft cloth dampened with warm water.
• Before each use, remove any fluff, dust and hair from the air outlet [9] and the protective grille with
lint filter [8] using an appropriately sized brush.

9. Technical data

Weight
Voltage supply
Power consumption
Protection class
Ambient conditions
Permissible temperature range
Approx. 470 g
AC 100-120 / 220-240 V, 50-60 Hz
800-1200 / 1350-1600 W
II
Only approved for indoors
-10 to +40°C
17