Publicité
Les langues disponibles
Les langues disponibles
1. Point the flash head upward by 90°
2. Pull out the wide panel. The catchlight panel will come out at the same time
3. Push the wide panel back in
• Push in only the wide panel
• Follow the same procedures as for bounce flash
ZOOM: Setting the Flash Coverage and Using
the Wide Panel
The flash coverage can be set automatically or manually. Use the AP
setting in the C. Fn menu to select the flash head zoom range you
want.
AP OF - AUTO / 24/ 28/ 35/ 50/ 70/ 80/ 105mm
AP ON - AUTO / 16/ 18/ 23/ 33/ 46/ 53/ 69mm
Wide Panel - AP ON - 12mm
Wide Panel - AP OF - 14mm
• If you set the flash coverage manually, make sure it covers the lens
focal length so that the picture will not have a dark periphery.
For Manual Zoom mode, press the
<ZOOM/C.Fn> button.
• Turn the Select Dial to change the
flash coverage
• If < A > is displayed, the flash
coverage will be set automatically
Using the Wide Panel
Pull out the wide panel and place
it over the flash head as shown.
The flash coverage will then be
extended to 12mm or 14mm.
• The catchlight panel will come
out at the same time. Push the
catchlight panel back in.
27
Publicité
