Publicité
Les langues disponibles
Les langues disponibles
Flash Mode – Manual Flash
The flash output is adjustable from 1/1 full power to 1/128th power
in 1/3rd stop increments. To obtain a correct flash exposure, use a
handheld flash meter to determine the required flash output.
• Flash Output Power Range
The following table makes it easier to see how the stop changes in terms of
f/stop when you increase or decrease the flash output. For example, when
you decrease the flash output: 1/2, 1/2-0.3, or 1/2-0.7, or increase the flash
output:1/2, 1/2+0.3, 1/2+0.7, 1/1.
1/1-0.3
1/1
1/2+0.7
• Optical O1- Standard optical wireless triggering
Remove the Modus360RT from the camera hot shoe. Set it to manual mode
<GR>
and press the
be triggered optically and will fire synchronously when a second main flash
fires. The second main flash is typically also in Manual mode and is on the
camera hot shoe. The off camera flash in O1 and the main flash must have a
clear optical path between them. This helps create multiple lighting effects.
• Optical O2 - Preflash optical wireless triggering
Remove the Modus360RT from the camera hot shoe. Set it to manual mode
<GR>
and press the
be triggered optically and will fire synchronously when a second main flash
fires. The second main flash is typically in TTL mode and is on the camera
hot shoe. The off camera flash in O2 and the main flash must have a clear
optical path between them. This helps create multiple lighting effects.
• O1 and O2 optic triggering is only available in M manual flash mode.
• Press button <SYNC> to activate the "
mode.
1/1-0.7
1/2-0.3
1/2
1/2+0.3
1/4+0.7
button to switch on O1. With this function, the flash will
button to switch on O2. With this function, the flash will
15
1. Press < MODE > button so that
<
> is displayed
2. Turn the Select Dial to choose a
desired flash output amount
• In high-speed sync mode, the
adjustable flash range is 1/16~1/1
1/2-0.7
1/4
1/4+0.3
HSS" when in O1/O2
------
------
Publicité
