Hahnel MODUS 360RT Manuel D'instructions page 18

• Master Unit Setting
• Slave Unit Setting
• On Camera Setting
• Press the <
blinking.
• Turn the <Select Dial> until only the <
on the LCD panel.
• Press < SET > button
• "Master" Group - Mode setting
> button for 2 seconds so that <
• Press the <
seconds so that <
icon > is blinking.
• Turn the <Select Dial> until the
< icon> is displayed on
the LCD panel.
• Press < SET > button
• Press the <
seconds so that <
icon > is blinking.
• Turn the <Select Dial> until the
< icon> is displayed on
the LCD panel.
• Press < SET > button
wireless icon > is blinking
1) On the "
<GR> button to select groups:
Groups A, B, and C are for the off
camera slave units. The master,
or on camera flash is in Group M.
Then press the < MODE > button
to select the "Flash Mode" (OFF/
TTL/M mode) for that particular
group. Repeat this for all groups to
the desired lighting arrangement.
18
> button for 2
wireless
> button for 2
wireless
wireless icon > is
" unit, press the