Hahnel MODUS 360RT Manuel D'instructions page 25

6. Use the adjust dial to set the power output in < M > mode and
FEC in <TTL> mode.
7. Press the <SEL> button to save your selection.
Multi Mode
• Press and hold the < Group A > button to select the Multi mode
< > . Use the < SEL > button, Group Buttons and adjust dial to
set the number of flashes, flash frequency and power output. Press the
< SEL > button again to save selection.
• For more detail on operation of the viper Mini visit www.hahnel.ie
< > High-Speed Sync
On the camera Flash Function Setting Menu set <SYNC> to Auto FP <
HSS > The HSS Icon <
< >
Second-Curtain Sync (Rear-Curtain Sync)
On the camera Flash Function Setting Menu set <SYNC> to Second
Curtain.
The Second Curtain sync icon <
display.
To Revert to normal first curtain sync, select first curtain in the
<SYNC> section of the Flash Function settings menu.
6
Illuminating for video shooting – LED light
You can use the LED light of the Modus 360RT as a light source
for video shooting. It helps create natural lights and shadows in an
environment with poor lighting and add more 3D effects in video.
+ 2 Sec.
> -is switched ON on the Viper display.
> is activated ON on the Viper
Other Applications
1 Long press < SET /
for more than 2 sec. to enter the
"LED-Menu".
2 Now short press < SET > button to
turn ON / OFF LED.
3 Use the Select Dial to change the
LED light power from 1 to 5.
4 Long press < SET /
again the exit the "LED – Menu".
25
> button
> button