Mediclinics M14ACS Manuel D'installation Et D'utilisation page 15

Pilot light information
Light leds on the top of the hand dryer (see figure 5) give advice about:
1: Standby (green colour) or
operation status (orange colour).
2: Red colour led bright when motor
has a problem of consumption
(due to brushes which may be wearing
out or due to a blocked or locked sate of motor).
3.- Blue colour led bright when cabinet of water is full.
Air filter
Air filter must be changed as the pictures of figure nº 6 shows.
No smell load charge
Figure nº 7 shows how to install the no smell charge.
Figure 6
Figure 7
-15-
www.mediclinics.com
Figure 5