Costway TW10082 Instructions page 8

6
Step 6: Assembling the Spring Pad onto the Trampoline Bed
6.1 Lay the Spring Pad (#2) over the trampoline so that the springs
and the steel frame are covered.
Ensure that the Spring Pad (#2) covers all metal parts.
6.2 Tie the strap located at the under side of the Spring Pad (#2) to
the frame.
7
Step 7: Connecting the Y Shaped Joint with Flat Steel
7.1 Collect all the Flat Steel (#18) and Y Shaped Joint(#19).
These will serve as support for the Enclosure(#15) when lifted.
7.2 There are cloth sleeve sewn on the top edge of the
Enclosure(#15).
Slide one Flat Steel (#18) into the cloth sleeve and connect
the Flat Steel (#18) with the Y Shaped Joint(#19), then fasten
two side Short Bolts (#20) and Nuts (#21) by Spanner(#17) on
the Y Shaped Joint(#19).
14
#2
Step 8: Affixing the Enclosure Pole Tubes
8
8.1 Connect the Y Shaped Joint (#19) with Upper Pole(#11)
Fixed by Screw (#16), complete assembly of all the Y Shaped
Joint(#19) with Upper Pole (#11).
15