3
#5
Please Note:Make sure the side with
locking pin holes on thick end of the
Section B(#5) should face inwords.
Step 3: Assembling the Top Frame to the Vertical Tubes
3.1 Place the Top Frame Tube(#3) and Section B(#5) as shown in
the picture. Then slide the Top Frame Tube(#3) into one Section B
(#5) as shown in the picture:
#5
#7
10
#3
3.2 Then attach the assembled Top
Frame(#3) and Section B(#5) part into
the Vertical Tube(#7) by spring button
clips.
3.3 After completing the assembly, the trampoline frame should look
like the picture shown.
4
Wider
Narrower
opening
opening
(Connects to
(Connects
frame)
to mat)
#9
#8
Please Note: The hooks at
each end of the spring are
different in the opening. One
is wider and the other is
narrower. See the spring as
shwon in the picture.
11